JLG 600A_AJ Operator Manual - Manual (Page 54)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-10 – JLG Lift – 3121615
6. Glow Plug/ Wait to Start Indicator
Indicates the glow plugs are on. The glow
plugs are automatically turned on with the
ignition circuit and remain on for approxi-
mately seven seconds. Start the engine only after the light
goes out.
7. Platform Overload Indicator. (If Equipped)
Indicates the platform has been overloaded.
8. Drive and Steer Disable Indicator (If equipped)
Indicates the Drive and Steer Disable function
has been activated.
Platform Station
(See Figure 3-4.)
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.
1. Drive Speed/Torque Select
The machine has a two position
switch - The forward position
gives maximum drive speed. The
back position gives maximum
torque for rough terrain and
climbing grades.