JLG LSS Scissors User Manual
Page 32
Advertising
SECTION 4 - OPERATION - (RS)
4-4
– JLG Lift –
3124288
Pressing the Enter key will request that the technician
engage lift up until the platform has reached maximum
height:
CAL ANGLE:
LIFT TO MAX
If the Angle Sensor's reading at maximum height is
acceptable the Control System will record the sensors
value and Analyzer will display the following.
CAL ANGLE:
LOWER TO STOWED
If the Angle Sensors range from stowed to maximum
height is acceptable the Analyzer will display the follow-
ing:
CAL ANGLE:
COMPLETE!
CAL ANGLE:
LIFT TO MAX
CAL ANGLE:
LOWER TO STOWED
CAL ANGLE:
COMPLETE!
Advertising