JLG LSS Scissors - Manual (Page 63)

3124288
– JLG Lift –
7-3
.
FIGURE 7-1. LOAD SENSING SYSTEM INSTALLATION (260MRT, M3369/M4069 & 3369LE/4069LE)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
LOAD SENSING SYSTEM INSTALLATION Ref.
0272964 260MRT (Platform without D-Rings) Ref. F
0272965 260MRT (Platform with D-Rings) Ref. E
0272930 E/M3369/4069LE (Platform without D-Rings) Ref. I
0272931 E/M3369/4069LE (Platform with D-Rings) Ref. I
1 to 3 Not Used
4 Bolt Options: 3
0641405 Prior to S/N 0200120066
0641415 S/N 0200120066 to Present
5 to 6 Not Used
7 Bolt Options: 4
260MRT:
0641636 Bolt 3/8”-16NC x 4 1/2” (Prior to S/N 0200124148)
0701029 Bolt (Metric) M10 x 120mm (S/N 0200124148 to Pres-
ent)
E/M3369/4069LE:
3931648 Capscrew 3/8”-16NC x 3” (Prior to S/N 0200124146)
4032022 Capscrew (Metric) M10 x 90mm (S/N 0200124146 to
Present)
8 to 9 Not Used
10 Module, Load Sensing Options: 1
1600350 Prior to S/N 0200120066
1600387 S/N 0200120066 to Present
11 to 14 Not Used
15 3311405 Locknut 1/4”-20NC 3
16 to 17 Not Used
18 Locknut Options: 4
3311605 Locknut 3/8”-16NC (Prior to S/N 0200124146)
3291005 Locknut (Metric) M10 (S/N 0200124146 to Present)
19 Not Used
20 3422938 Pin, Load Management (Includes Harness) 4 E
20A Not Available Connector, Strain Relief 1
20B Not Available Plug, Male 6 Position 1
Not Available Socket, Female 6
21 to 28 Not Used
29 4751600 Flatwasher 3/8” 8
30 to 31 Not Used
32 4922904 Module to Analyzer Harness 1 B
32A 4460836 Plug, Male 12 Position 1
4460465 Socket, Female 4
4460466 Seal, Plug 8
0840055 Boot 1
32B 4460761 Connector, Female 4 Position 1
4460294 Pin, Male 4
33 Main Load Sensing Harness 1
4922915 260MRT (Prior to S/N 0200193881) A
4922903 E/M3369/4069LE (Prior to S/N 0200152398) B