JLG 510AJ Series II Operator Manual - Manual (Page 43)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121292 – JLG Lift – 3-11
9. Telescope Control
This switch allows extension and retraction
of the main boom.
10. Lights (If Equipped)
This switch operates the chassis lights if the
machine is so equipped.
11. Jib Lift (if equipped)
Provides for raising or lowering of the jib by
positioning up/down.
12. Soft Touch Override Switch (If equipped)
This switch enables the functions that were cut out by
the Soft Touch system to operate again at creep speed,
allowing the operator to move the platform away from
the obstacle that caused the shutdown situation.
13. Soft Touch Indicator (If Equipped)
Indicates the Soft Touch bumper is
against an object. All controls are cut
out until the override button is pushed, at which time
controls are active in the Creep Mode.
14. Tower Boom Lift
Provides for raising and lowering of the
tower boom when positioned up or down.
15. Platform Rotate
Provides rotation of the platform when posi-
tioned to the right or left.