JLG 510AJ Series II Operator Manual - Manual (Page 73)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121292 – JLG Lift – 6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary
information to the operator for proper operation and mainte-
nance of this machine.
The maintenance portion of this section is intended as infor-
mation to assist the machine operator to perform daily main-
tenance tasks only, and does not replace the more thorough
Preventive Maintenance and Inspection Schedule included
in the Service and Maintenance Manual.
Other Publications Available:
510AJ Service and Maintenance Manual ................. 3121293
510AJ Illustrated Parts Manual ................................ 3121294
6.2 OPERATING SPECIFICATIONS AND
PERFORMANCE DATA
Table 6-1. Operating Specifications
Unrestricted Rated Capacity
ANSI
CE & Australia
500 lb. (227 kg)
500 lb. (230 kg)
Maximum Travel Grade (Gradeability)
with Boom retracted and approxi-
mately horizontal. Tower Boom fully
lowered (if equipped).
45%
Maximum Travel Grade (Sideslope)
with Boom retracted and approxi-
mately horizontal. Tower Boom fully
lowered (if equipped) - ANSI Mar-
kets. 5°
Maximum Travel Grade (Sideslope)
with Boom retracted and approxi-
mately horizontal. Tower Boom fully
lowered (if equipped) - CE & Austra-
lia Markets. 4°
Ground Bearing Pressure 84 psi (5.9 kg/cm 2 )