IOGear GWPAP1 - Manual (Page 19)

19
NetShair Nano Setup
Computer / Other
Note: Follow the steps below to setup NetShair Nano using
the web client for computers or mobile devices with a full
HTML browser.
Do not connect Ethernet cable until last step! (See Internet
Connection)
1. Power on the NetShair Nano by plugging it into a powered
USB port on your laptop / desktop or by plugging it into a
USB charging adapter of a USB mobile device.
2. Click on the wireless icon on the bottom right corner of
the screen.
3. Choose the
“NetShair_Nano_XXXX”
Network.
4. Enter the default password
“12345678” and then press
OK to connect.
5. Wireless Network connection
will show NetShair_Nano_
XXXX connected.