IOGear GWPAP1 User Manual
Page 9
Advertising
9
1. On the Home screen,
tap
Advance Setting,
then
Set WAN Interface.
Router Mode: DHCP (Default)
2. The default setting is DHCP client.
If the network requires a username
and password to access, select
PPPoE. Enter the username and
password then tap
OK.
3. Tap
Restart to save settings.
4. After the NetShair Nano reboots,
connect an Ethernet cable to the
NetShair Nano. The Network LED
indicator will light solid once a
successful connection has been made.
5. Connect back to NetShair_Nano_XXXX
Wi-Fi network. Open your web browser to access the internet.
Advertising