2N IVR Editor manual v1.0 - Manual (Page 30)

Configuration 3.1
26
Transfer to Number
For this call transfer type, enter the number of an internal line, department (user
groups in 2N
® OfficeRoute), VoIP phone connected to the 2N ® Omega PBX Ethernet
module/2N ® OfficeRoute, or an external telephone.
Example:
- transfer to department 10 (LCR routes the call via the PBX).
- transfer to internal line 11 (LCR routes the call via the PBX).
- transfer to VoIP line 3001 (LCR routes the call via VoIP).
- transfer to a mobile phone (the number is for
example only, generally, LCR and call routing settings are required for this function).
Caution
 The LCR has to be set properly for external call routing (outside the PBX).