Omega 48 installation manual – 2N Omega 48 - Installation Manual v1.0 User Manual
Page 30
Advertising
2N
®
- OMEGA 48
Installation manual
Installation manual
30
7.4. Installation of extender module up to 24 lines
As the first an extender module fix with seven screws to basic chassis, then
connect DATA and power supplying cable between main board (connectors J19,
J27) and extender bard (connectors J1, J2, J3).
7.5. Installation of Line modules
Note: All modules can be fitted separately even after the PBX is mounted on the wall, but it
is more comfortable to fit them on a table.
Line modules can be fitted in any position on the motherboard (connectors
J2-J7) or extender module (connectors J2-J7).
Advertising