2N Omega 48 - Installation Manual v1.0 - Manual (Page 7)

2N
®
- OMEGA 48
Installation manual
Installation manual
7
www.2n.cz
Description of parts of basic module
2. Description of mechanical parts
2.1. Base (chassis)
The base carries the other parts. The power supply (plug 110 - 230V/AC +
power switch) is mounted in the upper right part. The upper left + lower left part is
intended for fitting the extender. The strip with holes in the bottom part is intended
for fitting serial and blanking platelets. The display is fixed in the upper part in the
centre.