2N Omega Lite - Installation Manual v1.9 User Manual
Page 28
28
5.9. Audio lines module (order No 1880019)
The audio module is intended for voice services of the PBX such as VoiceMail,
automatic operator, automatic information system (IVR) etc..
For connecting to the sound card in a PC, the module is fitted with two
connectors of the type 3.5 mm JACK - STEREO. One for connecting Line IN and the
other for Line OUT. Using this module it is thus possible to perform voice services for
both call channels simultaneously (two calls). It is inserted in position J8 on the
extender module in the PBX.
J1
- connector for connecting to position J8 on extender module
(connector is secured against incorrect connection by the blanking off
of PIN 5,6,7,8).
J2
- connector for connecting LINE IN (PORT1).
J3
- connector for connecting LINE OUT (PORT1).
J4
- connector for connecting LINE IN (PORT2).
J5
- connector for connecting LINE OUT (PORT2).
J6
- connector for connecting LINE IN (PORT3).
J7
- connector for connecting LINE OUT (PORT3).
J8
- connector for connecting LINE IN (PORT4).
J9
- connector for connecting LINE OUT (PORT4).
5.10. Relay and binary switches module (Order No 1880018)
The module is intended for switching using relays or for the use of binary input.