2N Omega Lite - Installation Manual v1.9 - Manual (Page 35)

35
module from the upper part. Open it and check everything against the packing sheet,
which is a separate annex to the documentation. Check whether there was any
mechanical damage to the parts during shipping. On the top of the box there is a
printed reinforcing piece which serves as a drilling template for the mounting of the
PBX. Keep the packaging (especially from the extender modules).
6.3. Installation of extender module
First connect an extender module (extender) using connector J1 with the
motherboard (connector J1) and then affix it to the chassis of the basic module
using six screws.
6.4. Installation of Line modules
Note: All modules can be fitted separately even after the PBX is mounted on the wall, but it
is more comfortable to fit them on a table.
Line modules can be fitted in any position on the motherboard (connectors
J2-J7) or extender module (connectors J2-J7).