Button module, Wiegand module – 2N Helios IP Verso v1.1 User Manual
Page 89
89
5-Button Module
The 5-button module is one of the
intercom elements and is
2N
®
Helios IP Verso
used for extending the number of buttons.
The module contains two
bus connectors.
2N
®
Helios IP Verso
These two connectors are fully interchangeable and can be used both as inputs
from the basic unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
Wiegand Module
The Wiegand module is one of the
intercom elements and is
2N
®
Helios IP Verso
used for connecting an external Wiegand device (RFID card reader, fingerprint or other
biometric data reader) and/or connecting the
system to an
2N
®
Helios IP Verso
external security exchange. All the inputs and outputs are galvanically isolated from
the
system with insulation strength of 500 V DC.
2N
®
Helios IP Verso
The module contains two
bus connectors.
2N
®
Helios IP Verso
These two connectors are fully interchangeable and can be used both as inputs
from the basic unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes an 80 mm long interconnecting cable.
The input is addressed as follows:
, e.g.
<module_name>.<input_name>
module2.tamper. The module name is configured in the Module name parameter
in the Hardware / Extenders menu.