3 2n® helios ip manager settings – 2N Attendance System v1.2 User Manual
Page 13
13
2.3 2N® Helios IP Manager Settings
Make sure that the following settings are selected in the
to
2N
Helios IP Manager
®
make your
work properly:
2N
Attendance System
®
1) Tick off the
checkbox on the
tab in the
Attendance Monitoring
Attendance
Users
menu for all the users to be monitored as shown in the figure below:
User Attendance Monitoring Enable
Figure:
2) Add a card (or card number) to the user on the
tab via a
reader,
Cards
USB card
for example, as shown in the figure below:
Card Adding to User
Figure:
3)
Tick off the Attendance monitoring checkbox for all the intercoms used for
attendance monitoring. Find the checkbox in the
item in the
menu. M
Device
Devices
oreover, choose one of the following intercom modes:
– check-in intercoms help record
.
Check-In
arrivals
–
.
Check-Out
check-out intercoms help record departures
– combined intercoms record passages
Combine Check-In and Check-Out
without differentiating arrivals and departures.
The same settings apply to card readers; refer to
–
in the
Devices
Settings
Card
section for configuration details (see the figures below).
Reader
Refer to the subsection describing the
tab in
to
Attendance
Event adding
2N
®
Attendance System for the principle.