2N NetStar User Manual - Manual (Page 19)

19
the stations start ringing. Having answered the call, the subscribers become
participants to the conference and you, as the initiator, can quit the conference or
actively participate in it as a full-fledged member.
All successful connections are billed to the station that initiated
the conference.
If other stations join in the current conference using the Joining
in Call service, the call is billed to the incoming stations.
Adding to Conference
The Add to Conference service is used for either connecting three subscribers into a
conference or adding another subscriber to a currently active conference call. Dial:
*0#
Conference calls are subject to licence.
Set Up Conference
Are you talking with a colleague, having put another call on hold, and want to join the
three calls together within a conference? No problem. Just put the other call on hold
too and use the Add to Conference service.
Example: Suppose you are talking to a colleague and have put an earlier call on hold
(the held subscriber hears the Music on Hold). To joint all the call together in a
conference, push FLASH to put the two calls on hold (the subscribers hear the Music on
Hold) and get the tone again. Dial *0#. Now all the three subscribers are participants
of a conference call.
Add to Conference
Are you a conference call participant and do you want to invite another colleague for
advice? Just put the call on hold, call the selected colleague, put the selected
colleague's call on hold too and use the Add to Conference service.
Example: Suppose you have set up a conference call and want colleague 1006 to take
part in it too. Push FLASH to get the dialtone while the other participants can talk on.
Dial your colleague's number, i.e. 1006. The colleague answers the call. Repress FLASH
and put the colleague's call on hold. After you hear the dialtone again, dial *0#. Now
all of you are taking part in the conference.
Conference Room
The conference room can be used for variable purposes. It helps a duly authorised
subscriber call a conference or subscribers join in the conference progressively. The
conference room is active within a certain time interval and can be made accessible to
selected users only. Dial: