Digital input connection, Lan connection – 2N SIP Speaker Installation v2.1 User Manual
Page 14
14
Digital Input Connection
2N SIP Speaker is equipped with a digital input for an optional button, movement
®
sensor or other applications. This input is available on the
terminal.
LOGIC IN
Figure: Digital Input Connection
LAN Connection
2N SIP Speaker
®
can be connected to a standard local area network using a LAN
interface via the RJ-45 connector on the back panel. Always use CAT-5d or higher class
cables for reliability reasons.
LAN Connection
Figure:
The LAN interface is equipped with the Auto MDIX function for automatic
straight/cross-over cable detection.
The LAN interface can also be used for the
power supply through
2N SIP Speaker
®
active network elements or injectors meeting the IEEE 802.3af standard.
Warning
Do not exceed the maximum voltage values (24V) applied to the LOGIC
input to avoid irreversible damage of the equipment.
IN
Note
With PoE, the integrated amplifier power output is limited to 10 W. To
utilise the maximum power output of the amplifier, feed 2N
SIP Speaker
®
from a 12V DC/1.8A external power supply.