2N SIP Speaker Installation v2.1 User Manual
Page 26
26
User deactivated
Used when the user deactivation code is entered. The
deactivation code is used for user (telephone directory position)
deactivation. An inactive user cannot be called, but the call may
be forwarded to the user substitute if predefined. Refer to the
Telephony Directory subsection for deactivation code settings.
Calendar activated
Used for calendar activation. Use this function, for example, to
enable user group ringing in an office. Refer to the Scheduler
subsection for activation code settings.
Calendar deactivated
Used for calendar deactivation. Use this function, for example, to
disable user group ringing in an office and forward the call(s) to
a predefined telephone number (reception desk or user mobile
phones). Refer to the Scheduler subsection for deactivation code
settings.
Call prolongation confirmation signalling
The maximum call duration is set in
for
2N SIP Speaker
®
security reasons; refer to Miscellaneous subsection.
Internal application launched
Upon
power up or restart, the
2N SIP Speaker
®
2N
®
internal application is launched. A successful
SIP Speaker
launch is signalled by this tone combination.
Connected to LAN, IP address received
When the internal application has been launched, 2N
®
logs into the LAN. A successful login is signalled
SIP Speaker
by this tone combination.
Disconnected from LAN, IP address lost
This tone combination signals that the UTP cable has been
disconnected from
.
2N SIP Speaker
®
Invalid telephone number or invalid switch activation
code
2N SIP Speaker
®
allows you to store an extension number or
enter the switch opening code. If the number/code is invalid, this
tone combination is used.
Default reset of network parameters
Enter the default reset code for the network parameters within a
30-second timeout after power up. Refer to Factory Default
Reset with Static IP Address and Factory Default Reset with
DHCP Client ON for details.