2N SIP Speaker Installation v2.1 - Manual (Page 22)

22
2N TELEKOMUNIKACE a.s., www.2n.cz
®
1.
2.
3.
3.2 Default Reset
Factory Default
The following factory default parameters are available:
Parameter Default
DHCP Off
IP address 192.168.1.100
Mask 255.255.255.0
Default gateway 192.168.1.1
User name Admin
Password 2n
Factory Default Reset
In some cases, it may be useful to reset the factory default values 2N SIP Speaker
®
using the RESET button on the back panel. Do so, for example, if ce 2N SIP Speaker
®
ases to respond due to, for example, incorrect LAN settings, LAN configuration
changes, forgotten password and so on.
Factory Default Reset with Static IP Address
Use a thin rigid tool (toothpick or paperclip) to press the RESET button on the
front panel. Do not disconnect the device from the power supply while resetting.
Figure: Reset with Static IP Address
Keep the RESET button pressed until the RDY/ACT LED stops flashing red and
you can hear a beep (for approx. 18 s).
Now release the RESET button.