2N Helios IP Automation Manual v2.7 - Manual (Page 39)

39
2N TELEKOMUNIKACE a.s., www.2n.cz
®
7. Examples of Use
Calling to Dispatching Office in Case of Unauthorised
Door Opening
Specification
Call the selected telephone number whenever the tamper switch gets disconnected
(device opened).
Block diagram
The rising edge on the tamper input (1: Event.InputChanged) initiates calling to the
defined telephone number (2: Action.BeginCall).
Intercom settings
1: Event.InputChanged: Input=tamper
2: Action.BeginCall: Number=1111; Event=1