AirLive FE-200DM - Manual (Page 10)

1. Introduction
AirLive FE-200DM Manual 4
6. Power Jack:
The input power is DC 12V, 2A.
Note:
ONLY use package power adapter supplied with the internet. Otherwise, the
product may be damaged.
7. RJ-45 LAN Socket:
Connect to PC or Hub / Switch via a 10Base-T Ethernet or 100Base-TX Fast Ethernet
Cable.
This Ethernet port built with audio-negotiation protocol which can detect or negotiate the
transmission speed of the network automatically. Please use CAT-5 cable to connect the
Network Camera to a 100Mbps Fast Ethernet network switch or hub.
Note:
ONLY use one power source, either from DC or from 802.3af Power over Ethernet.
8. Micro SD Card Slot:
The IP Camera has built-in a Micro SD card slot which can accepts Micro SD memory card
for image / video event recording.
9. Audio In:
Connect a microphone to the IP Camera. Be noted to use actively microphone (normally
with power supplier on microphone) for this application.
10. Audio Out:
Connect a loud speaker to the IP Camera.
This is for voice alerting and two-way audio. Be noted to use actively speaker (normally
with power supplier on speaker) for this application.