AirLive FE-200DM - Manual (Page 9)

1. Introduction
AirLive FE-200DM Manual 3
1.3 Physical Overview and Connections
1. Light Sensor:
The Light sensor is for detecting IP Camera environmental illumination. If IP Camera is in
the dark/night environment, IR Cut Filter is switched off to let infrared light pass through for
clear night view.
2. MIC:
The IP Camera has built-in an internal microphone, which is hidden in the pinhole located
on the front panel.
3. Lens Focus Adjustment:
Rotate the lens to adjust the focal length to the best image.
If necessary, clean the lens with a soft cotton cloth.
4. Speaker:
The IP Camera has built-in an internal speaker, which is hidden in the pinhole located on
the front panel.
5. Reset Button
This button is hidden in the pinhole. For more information, please refer to Appendix A for
Restore Factory Default instruction.