AirLive FE-200DM - Manual (Page 37)

4. Administrating the Device
AirLive FE-200DM Manual 31
4.3.4 Event Configuration
1. To add an event trigger, click on “Add” and the setup panel will be expanded.
2. Give a name to this event.
3. Set the time interval between each trigger.
4. Set the time period for the trigger. Choose “Always” or “During time between” or “Never”.
5. The trigger condition is Motion Detection.
The responding actions can be “Upload images” and “Activate Output Port” and
“Send Email Notification” and “Send HTTP Notification to” and “Send Message Notification
(TCP)”. Click on “Save” to save the configuration made.
4.4 Schedule
4.4.1 General
Define the day (specified by days of a week) and time (specified by each single hour) for
that will be recorded during the scheduled period. Note only video data will be recorded.
A user can select which video stream should be recorded, and the size of each sliced file.
When the check box is ticked and setting is saved, the recording process starts.
Recording files are saved to the Micro SD storage.