AirLive FE-200DM - Manual (Page 35)

4. Administrating the Device
AirLive FE-200DM Manual 29
1. Click on “Add” to set up a detection area. (Setup panel will be expanded)
2. Give a name to this window area.
3. Select the trigger level and sensitivity for this detection window. (0~100, low~high)
4. Select color for detection window.
5. Draw detection window on the image.
6. Once everything is done, click on “Save” to save the configuration made.
Configured detection window will be displayed in motion detection list. (Circled in
blue)