AirLive FE-200DM - Manual (Page 55)

5. Appendix
AirLive FE-200DM Manual 49
is enabled. streamed image size. Try reducing the video streaming
size to 160x120 or 320x240 and/or disabling audio.
• Audio will consume 32 kbps. Disable audio to
improve video. Your Internet connection may not have
enough bandwidth to support streaming audio from the
device.
Image Transfer on
e-mail or FTP does not
work. • Default Gateway and DNS server address should be
set up correctly.
• If FTP does not work properly, ask your ISP or network
administrator about the transferring mode of FTP server.
Pan/Tilt does not work.
(including Click to
Center and Preset
Positioning) • Click [Refresh] on the Internet Explorer when the
communication stops with the device. The image will
refresh.
• Other clients may be operating Pan/Tilt.
• Pan/Tilt operation has reached the end of corner.
Pan/Tilt does not work
smoothly. There may be a slight delay when you are using the
Pan/Tilt feature in conjunction with streaming audio and
video. If you find that there is a significant delay while
panning or tilting the camera, try disabling the audio
streaming and/or reducing the video streaming size.
Video quality of the device
The focus on the
Camera is bad. • The lens is dirty or dust is attached. Fingerprints,
dust, stain, etc. on the lens can degrade the image
quality.
The color of the image
is poor or strange. • Adjust White Balance.
• To insure the images you are viewing are the best they
can be, set the Display property setting (color quality) to
16bit at least and 24 bit or higher if possible within your
computer.
•The configuration on the device image display is
incorrect. You need to adjust the image related
parameters such as brightness, contrast, hue and
sharpness properly.
Image flickers. • Wrong power line frequency makes images flicker.
Make sure the 50 or 60Hz format of your device.
• If the object is dark, the image will flicker. Make the
condition around the Camera brighter.
Noisy images occur. The video images might be noisy if the device is located
in a very low light environment. Make the condition