AirLive FE-200DM - Manual (Page 44)

4. Administrating the Device
AirLive FE-200DM Manual 38
Click this option to enable time synchronization with computer time.
z
Synchronize with NTP:
Click this option if you want to synchronize the device’s date and time with those of
time server called NTP server (Network Time Protocol).
z
Manual setting:
Click this option to set time and date manually.
z
Time zone:
Set the time difference from Greenwich Mean Time in the area where the device is
installed.
4.6.4 Server Maintenance
This page provides functions for the system maintenance of the device; Reboot and Load
default settings, as well as functionalities of launching upgrade process, backup/restore
user settings and language defines.
z
Reboot:
The device is restarted without changing any of the network settings. I t means the IP
address of the device will not change after firmware upgrade.
z
Load Default (Excluding Network setting):
The unit is restarted and most current settings are reset to factory default values.
This action will not reset the network setting.