AirLive NAS-235 - Manual (Page 11)

2. Getting Familiar with your NAS
AirLive NAS-235 User’s Manual 6
USB Eject Button
1
For USB port 1 device eject. Press and release to
prepare the USB device for removal. When the USB
LED turns off, it is safe to remove the USB device.
USB Port 1 & 2
(Up/Down)

Connect your USB Hard Disk Drive or USB Flash
Drive here. The USB HDD support FAT and NTFS
(Read only) file format

Connect USB printer
USB Eject Button
2
For USB port 2 device eject. Press and release to
prepare the USB device for removal. When the USB
LED turns off, it is safe to remove the USB device.
LAN
connector
Use this to connect the NAS to your
10/100/1000BaseT hub.
2.3. Audible Warnings
Audible warnings are given by the following signals.
1 Beep Reset button or power switch is pressed or system
is ready to use
3 Beeps
Repeated every 5
seconds for 3 minute.
Hard disk usage exceeds 98%