AirLive NAS-235 - Manual (Page 47)

5. Administration
AirLive NAS-235 User’s Manual 42
NTP (Network Time Protocol)
Enable NTP If enabled, the NAS Server will synchronize its clock with a NTP
(Network Time Protocol) Server.
NTP Server Enter the domain name or IP address of the NTP server you wish to
use. The NTP server can be a public server (on the Internet) or a
local server (on your own network). Note that special characters
(e.g. " / \ [ ] : ; | = , + * ? < > ' `) cannot be used in it.
NTP Status This shows the status of the NTP update procedure.
Synchronize ... Select how often you want the NAS Server to synchronize its clock
with the specified NTP server. You can also specify the time of the
next synchronization. This allows you to specify that the
synchronization should be performed (for example) at 11.00 pm
each day.
Sync Now Use this button to synchronize with the NTP server immediately.
Language
Language
Environment Specify the language environment for FTP clients and Download
Manager.
Download Manager
Enable Download
Manager If enabled, you can use Download Manager function on homepage
to download files with FTP and HTTP URLs. If a special language
exists in the URLs, you must make sure the Language Environment
above is correct, or they possibly fail to be downloaded.
Maximum Running
BT Tasks Specify maximum number of BT tasks that can run at same time. It's
up to 5 tasks.
Maximum Running
HTTP/FTP Tasks Specify maximum number of HTTP/FTP tasks that can run at same
time. It's up to 10 tasks.
Enable Schedule If enabled, Download Manager only runs on the specified time
period. If disabled, Download Manager always runs. The option only
takes effect when Download Manager is enabled.