AirLive NAS-235 - Manual (Page 52)

5. Administration
47 AirLive NAS-235 User’s Manual
MP3 Broadcast
Enable MP3
Broadcast
If enabled, then the NAS will broadcast MP3 in specified folder, and
user can listen to them by music players such as WinAMP etc. This
MP3 Broadcast supports files with extension .mp3.
Server Name Specify the name of the MP3 Broadcast.
Port This port number is used for HTTP connections to MP3 Broadcast..
The default is 1234.. If this is changed, you should use a number
greater than 1024. In order to connect to the music broadcast via
WinAMP etc, need add a ":" and the port number after the address,
e.g.:
HTTP://192.168.0.100:1234
This example assumes the NAS's IP Address is 192.168.0.100, and
the port number is 1234.
Play by Specify the order that MP3 should be broadcasted.
 Order - Play by order.
 Shuffle - Play by shuffle.
Content Directory Specify the location in which MP3 need be broadcasted.
Media Server
Enable Media
Server
If enabled, the NAS can be located by compatible Media Adapters,
using the UPnP AV standard developed by Intel and its partners. Media
content on the NAS (in the Content Directories specified below) can
then be accessed and played by the Media Adapters.
Server Name Name of the Media Server that is displayed on client devices.
Content Directory Directories where the Media Server shall scan for media content. You
can specify four Content Directories at most. You should click the
"Browse" button to select the desired folder. Each directory can be
limited to a certain media type. The default setting will scan for all
content types.