AirLive NAS-235 - Manual (Page 16)

3. Basic Installation & Setup
11 AirLive NAS-235 User’s Manual
3.3. Connect WN-200USB for Wireless Connection
We support WN-200 USB Dongle. If user plugged other Wireless Dongles, they are not
supported. The Wireless Dongle can be plugged into USB 1 or 2 port, but only one can
work if two are plugged.
Features
NAS-235 only supports Client Mode for the Wireless Dongle. It support following security
mode: None, WEP, WPA(AES, TKIP), WPA2(AES, TKIP)
Coordination of Ethernet and Wireless
NAS-235 does not support Wireless and Ethernet simultaneously. User has to define the
Ethernet or Wireless before to use this device. Device will detect the network type when
power on, if the Ethernet is detected, system will set the network to Ethernet mode, if
Ethernet is not detected, system will set network to Wireless mode.
LED Behavior
When the USB is plugged into one USB port, and then it succeeds to connect to the
specified AP, the corresponding USB LED will be turned on. If fails to connect to the AP, the
USB LED is always off.