AirLive NAS-235 User Manual
Page 70
5. Administration
65 AirLive NAS-235 User’s Manual
Schedule
Use these fields to set up a schedule to run Scandisk regularly, if
desired. The available options are:
Never - Scandisk will not be scheduled to run.
Every Day - select this to have scandisk run each day, at the
specified time.
Every Monday, Every Tuesday, ... - Select this to have the
scandisk run once per week, on the specified day.
Use the time fields (hour, minute, am/pm) to specify when the
scandisk operation should be performed.
Standby
Use the "Set Hard Disk to standby mode…" setting to determine if
and when the hard disk drives should be switched to "Standby"
mode.
Use the "Turn off the fan…" setting to determine if and when the fan
should be turned off.
Buttons
Change
Click this button to enter the screen of changing Disk Mode.
Format
Use this button to format the disk. This will partition and quick-format
the new disk.
WARNING! This will destroy any data on the disk. Once started, this
process can NOT be halted or reversed.
S.M.A.R.T.
Check - Click this button to run the S.M.A.R.T. check
immediately.
Scandisk
Start - Click the button to start the Scandisk. The Scandisk could
take long time, and the disk is unavailable to users while the
Scandisk is in progress.
Stop - If a Scandisk is in progress, click this button to terminate
the Scandisk immediately.