AirLive WIAS-3200N - Manual (Page 113)

Appendix A. Network Configuration on PC & User Login
AirLive WIAS-3200N User’s Manual
110
3) Using DHCP: If you want to
use DHCP, click on the IP
Address tab and choose
“Obtain an IP address
automatically”, and then click
OK. This is also the default
setting of Windows. Then,
reboot the PC to make sure an
IP address is obtained from
WIAS-3200N.
4) Using Specific IP Address: If you want to use a specific IP address, acquire the
following information from the network administrator: the IP Address, Subnet Mask
and DNS Server address provided by your ISP and the Gateway address of
WIAS-3200N.
Caution:
If your PC has been set up completely, please inform the network administrator before
proceeding to the following steps.
4.1) Click on the IP Address tab
and choose “Specify an IP
address”. Enter the IP
Address, Subnet Mask and
then click OK.