4 let your network to be a wireless network, System wireless general settings, Let your network to be a wireless network – AirLive WIAS-3200N User Manual
Page 25: 4let your network to be a wireless network, 1 system wireless general settings
4. Let Your Network to Be a Wireless Network
AirLive WIAS-3200N User’s Manual
22
4
4
Let Your Network to Be a
Wireless Network
4.1 System Wireless General Settings
Configure System’s Wireless General Settings, go to: Main Menu >> System >> Zone
Configuration.
Wireless General Settings:
y
Band: There are 4 modes to select, 802.11b (2.4G, 1~11Mbps), 802.11g (2.4G,
54Mbps), 802.11b+g, and 802.11g+n.
y
Short Preamble: The length of the CRC (Cyclic Redundancy Check) block for
communication between the Access Point and roaming wireless adapters. Select
Enable for Short Preamble or Disable for Long Preamble.
y
Short Guard Interval (802.11g+n only): The guard interval is the space between
symbols (characters) being transmitted to eliminate inter-symbol interference.
With 802.11n, short guard interval is half of what it is used to be to increase
throughput. Select Enable to use Short Guard Interval or Disable to use normal
Guard Interval.
y
Channel Width (802.11g+n only): For 802.11n, double channel bandwidth to 40
MHz is supported to enhance throughput.
y
Channel: Select the appropriate channel from the drop-down menu to
correspond with your network settings, for example, Channel 1-11 is available in
North American and Channel 1-13 in Europe, or choose the default Auto.