AirLive WIAS-3200N - Manual (Page 84)

10. System Management and Utilities
81 AirLive WIAS-3200N User’s Manual
The administrator can download the latest firmware from website and upgrade the system
here. Select the latest firmware and Browse button, and then click Apply, the system will
upload the file and restart to perform the upgrade process. It might take a few minutes
before the upgrade process completes.
Note:
After clicking Apply, the system will begin uploading the chosen firmware into the system. Once
the upload process is complete system will restart to activate the new firmware. The entire
process may take a few minutes until the new firmware WMI appears. When restart is complete,
system will not lease IP. So, please use static IP PC to upgrade system firmware.
Caution:
1. Firmware upgrade may cause the loss of some data. You may need to manually backup
user account information, please refer to the release notes for the limitation before
upgrading.
2. Do not power on/off the system during the upgrade or restart process. It may damage the
system and cause malfunction.
10.9 Restart
To perform system restart, go to: Utilities >> Restart.
This function allows the administrator to safely restart WIAS-3200N, and the process takes
approximately three minutes. Click YES to restart WIAS-3200N; click NO to go back to the
previous screen. Do NOT power off the power during system restart as this might damage
the system. If the power needs to be turned off, it is highly recommended to restart
WIAS-3200N first and then turn off the power after completing the restart process.