AirLive WIAS-3200N - Manual (Page 57)

6. Restrain the Users
AirLive WIAS-3200N User’s Manual
54
o
Rule Number: This is the rule selected “1”. Rule No. 1 has the highest
priority; rule No. 2 has the second priority, and so on.
o
Rule Name: The rule name can be changed here.
o
Source/Destination – Interface/Zone: There are choices of ALL, WAN,
Public and Private to be applied for the traffic interface.
o
Source/Destination – IP Address/Domain Name: Enter the source and
destination IP addresses. Domain Name filtering is supported but Domain
Host filtering is not.
o
Source/Destination – Subnet Mask: Select the source and destination
subnet masks.
o
Source- MAC Address: The MAC Address of the source IP address. This is
for specific MAC address filter.
o
Service Protocol: These are defined protocols in the service protocols
list to be selected.
o
Schedule: When schedule is selected, clients assigned with this policy are
applied the firewall rule only within the time checked. There are three
options, Always, Recurring and One Time. Recurring is set with the hours
within a week.
o
Action for Matched Packets: There are two options, Block and Pass.
Block is to prevent packets from passing and Pass is to permit packets
passing.
6.3.2 Routing
Specific Route Profile: Click the button of Setting for Specific Route Profile, the
Specific Route Profile list will appear.