4 wan bandwidth control, Wan bandwidth control – AirLive WIAS-3200N User Manual
Page 19
Advertising
![background image](/manuals/553985/19/background.png)
3. Combine WIAS-3200N to the Network
AirLive WIAS-3200N User’s Manual
16
3.4 WAN Bandwidth Control
Configure WAN Bandwidth Control, go to: System >> WAN Traffic.
The feature gives administrators control over the entire system’s traffic though the WAN
interface. These parameters set here should not exceed the real bandwidth coming from
your ISP. For example, if your xDSL is 8Mbs/640kbs, you may input these two values here.
Available Bandwidth on WAN Interface:
y
Uplink: It specifies the maximum uplink bandwidth that can be shared by clients of the
system.
y
Downlink: It specifies the maximum downlink bandwidth that can be shared by clients
of the system.
Advertising