AirLive WIAS-3200N - Manual (Page 89)

10. System Management and Utilities
AirLive WIAS-3200N User’s Manual
86
must reset the internal clock through the NTP.
¾ Print the kernel ring buffer: It is used to examine or control the kernel ring
buffer. The program helps users to print out their boot-up messages instead
of copying the messages by hand.
¾ Main menu: Go back to the main menu.
y Change admin password
Besides supporting the use of console management interface through the
connection of null modem, the system also supports the SSH online connection
for the setup. When using a null modem to connect to the system console, we do
not need to enter administrator’s password to enter the console management
interface. But connecting the system by SSH, we have to enter the username and
password.
The username is “admin” and the default password is “airlive”, which is the same
as for the web management interface. Password can also be changed here. If
administrators forget the password and are unable to log in the management
interface from the web or the remote end of the SSH, they can still use the null
modem to connect the console management interface and set the administrator’s
password again.
Caution:
Although it does not require a username and password for the connection via the serial port, the
same management interface can be accessed via SSH. Therefore, we recommend you to
immediately change the WIAS-3200N Admin username and password after logging in the
system for the first time.
y Reload factory default
Choosing this option will reset the system configuration to the factory defaults.
y Restart WIAS-3200N
Choosing this option will restart WIAS-3200N.