AirLive WIAS-3200N User Manual
Page 88
10. System Management and Utilities
85
AirLive WIAS-3200N User’s Manual
y
Utilities for network debugging
The console interface provides several utilities to assist the Administrator to check
the system conditions and to debug any problems. The utilities are described as
follows:
¾
Ping host (IP): By sending ICMP echo request to a specified host and wait for
the response to test the network status.
¾
Trace routing path: Trace and inquire the routing path to a specific target.
¾
Display interface settings: It displays the information of each network
interface setting including the MAC address, IP address, and Netmask.
¾
Display the routing table: The internal routing table of the system is displayed,
which may help to confirm the Static Route settings.
¾
Display ARP table: The internal ARP table of the system is displayed.
¾
Display system up time: The system live time (time for system being turn on)
is displayed.
¾
Check service status: Check and display the status of the system.
¾
Set device into “safe mode”: If the administrator is unable to use Web
Management Interface via browser for the system failed inexplicitly. The
administrator can choose this utility and set it into safe mode, which enables
him to manage this device with browser again.
¾
Synchronize clock with NTP server: Immediately synchronize the clock
through the NTP protocol and the specified network time server. Since this
interface does not support manual setup for its internal clock, therefore we