APG PG10 user manual - Manual (Page 20)

PG10 Rev. B, 6/11
20
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Logging Sample Rate (SAMPLE):
Determine the interval between logged readings whenever logging is activated.
Options: 1 second (1s), 30 seconds (30s), 1 minute (1m), 30 minutes (30m),
1 hour (1h), and 1 day (1day).
Setting the Logging Sample Rate:
Step 1: Press to enter the main setup menu.
Step 2: Press or to cycle through the options until dATLOG is
displayed.
Step 3: Press to enter the Datalogging menu.
Step 4: Press or to cycle through the options until SAMPLE is
displayed.
Step 5: Press to access the Logging Sample Rate setting options.
Step 6: Press or to cycle through the sample rate settings.
Step 7: Press to apply the displayed setting and return to Datalogging
menu.
MODE
ENTR
ENTR
ENTR