APG PG10 user manual - Manual (Page 25)

Rev. B, 6/11 PG10
25
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Enabling and Disabling the Clock on the main display (CLOCK):
When enabled, the time will be displayed on the lower line (menu line) of the
main display, alternating every two seconds with the unit of measure.
Options: ON or OFF
Enabling or Disabling the Main Display Clock:
Step 1: Press to enter the main setup menu.
Step 2: Press or to cycle through the options until dATLOG is
displayed.
Step 3: Press to enter the Datalogging menu.
Step 4: Press or to cycle through the options until CLOCK is
displayed.
Step 5: Press to access the Clock on/off option.
Step 6: Press or to cycle between the options.
Step 7: Press to apply the displayed option and return to Datalogging
menu.
MODE
ENTR
ENTR
ENTR