APG PG10 user manual - Manual (Page 35)

Rev. B, 6/11 PG10
35
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Stop Bits (STOPbT):
Sets the number of stop bits for the RS-485 communications. Options: 1 Stop
bit, 2 Stop bits
Setting the number of Stop Bits:
Step 1: Press to enter the main setup menu.
Step 2: Press or to cycle through the options until COMM is
displayed.
Step 3: Press to access the Communications settings menu.
Step 4: Press or to cycle through the options until STOPbT is
displayed.
Step 5: Press to access the Stop Bit setting.
Step 6: Press or to cycle through the settings options.
Step 7: Press to accept the settings and return to the Communication
settings menu
MODE
ENTR
ENTR
ENTR