APG PG10 user manual - Manual (Page 32)

PG10 Rev. B, 6/11
32
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Setting the Trip Point Outputs:
Step 1: Press once to enter the main setup menu.
Step 2: Press or to cycle through the options until OUTPUT is
displayed.
Step 3: Press to access the Output Settings menu.
Step 4: Press or to cycle through the options until T1TYPE (or
T2TYPE) is displayed.
Step 5: Press to access the Trip Type setting.
Step 6: Press or to change the setting to the desired trip type function.
Step 7: Press to accept the trip type function and return to the Output
Settings menu.
Step 8: Press or to cycle through the Output menu options until
T1PRES (or T2PRES) is displayed.
Step 9: Press to enter the Trip Pressure setting. A 5-digit number will
appear with the fi rst digit fl ashing.
Step 10: Press or to change the value of the fi rst fl ashing digit.
Step 11: Press to accept the value of the fl ashing digit and advance to the
next digit......repeat steps 10 and 11 until the desired Trip Pressure is
fully entered.
Step 12: Press or to cycle through the Output menu options until T1WIN
(or T2WIN) is displayed.
Step 13: Press to enter the Trip Window setting. A 5-digit number will
appear with the fi rst digit fl ashing.
Step 14: Press or to change the value of the fi rst fl ashing digit.
Step 15: Press to accept the value of the fl ashing digit and advance to the
next digit......repeat steps 14 and 15 until the desired Trip Window is
fully entered.
Step 11: To exit the output menu, press or until EXIT is displayed and
press to exit to the main setup menu.
MODE
ENTR
ENTR
ENTR
ENTR
ENTR
ENTR
ENTR
ENTR