CiDRA SONARtrac PW VF-100 - Manual (Page 11)

20829-01 Rev 03 Page 3-1
3
GENERAL SAFETY GUIDELINES
Table of Contents
3 GENERAL SAFETY GUIDELINES .................................................................................. 3-1
3.1 Introduction .............................................................................................................. 3-1
3.2 Safety Precautions .................................................................................................. 3-2
3.3 Definitions of Symbols ............................................................................................. 3-2
3.3.1 General Warning or Caution ............................................................................ 3-2
3.3.2 Grounding ........................................................................................................ 3-2
3.3.3 General Warnings and Cautions ...................................................................... 3-3
3.3.4 Additional Warnings for installations in Hazardous Areas such as Class I,
Division 2 ......................................................................................................... 3-4
List of Figures
Figure 1 General Warning or Caution Symbol .................................................................... 3-2
Figure 2 Grounding Symbol ............................................................................................... 3-2
3.1 Introduction
This manual is intended to be a general installation guide for the
passive sonar process monitoring systems. It is not intended to cover
the installation details for every process due to the wide variety of
applications and processes on which the system can be used. In all
cases, local safety and operating practices should take precedence
over instructions contained within this manual.
The installer must fully read this manual prior to installing and
operating the passive sonar meter.
Note: Items that pertain to systems rated for Class I, Division 2,
Groups A, B, C, and D operation are highlighted in italic print.
The SONAR PROCESS MONITORING SYSTEM SUPPLEMENT
FOR ATEX ZONE 2 SAFETY provides additional information for
ATEX Class I, Zone 2 installations and takes precedence over this
manual.