COATS 9024 E-PAX and 9024E PAX Adapter - Manual (Page 12)

12 • Important: Always read and follow the operating instructions.
221. While holding the lift bar
down, position the right-hand
tapered roller assist device near
the edge of the tire tread and apply
an upward force.
222. This upward force from
the roller should free the tire bead
from the rim.
223. With the bead completely
free of the rim, remove the plastic
aid.
224. Remove the tire/wheel
assembly and flip the assembly
upside down. Secure the wheel
with the hub nut.
225. Position the tire bead
against the support ring.
226. Position the tapered roller
near the support ring.
227. Rotate the assembly and
continue to push down with the
roller.
228. Continue to rotate and
push down until the support ring
and tire are separated.
229. Note that the separation
of the tire and rim has left the tire
trapped. The rim must be removed
from the riser to allow the tire to
be removed.