Dascom 2600 User Guide - Manual (Page 52)

Tally Dascom 2610
39
Coax/Twinax Table 437 New-437
Table 737 775 Baltic Table 850
New-Dig 850 Table 851 Table 852
Table 857 Table 858 Table 860
Table 861 Old-Code 860 Table 863
Flarro 863 Table 865 865 Hebrew
Table 866 866 Bulgaria 866 Ukraine
866 Kazakhst Kamenicky Mazovia
Siemens Turk DEC Turkish Table 1250
Table 1251 Table 1252 Table 1253
Table 1254 Table 1257
Sl.Zero Sl.Zero=Off Sl.Zero=On Selects if normal zero (0) or the slashed
zero (Ø) is printed.
AutoCR On Off Switches the automatic carriage return
on or off after receiving the signal LF (line
feed).
AutoLF Off On Switches the automatic line feed (LF) on
or off after receiving the signal CR
(carriage return).
Menlock Off Menu All With MenLock=Off, all functions and
settings are accessible without restriction
in Online, Offline and Setup mode.
If MenLock=Menu is activated, all
functions and settings are still accessible
in Online and Offline mode, however, in
Setup mode you can only access the
parameter groups Adjust (setting the print
head gap [Head], top of form [TOF] and
tear position [Tear]), Paperway (setting
the paper path), Font (setting the font)
and the character spacing (CPI), while
access to Menu mode (Menu key) is
disabled.
If you select MenLock=All, you can
access the Online/Offline, Load/Park,
Paper and Paper Feed (LineFeed/Form
Feed, / ) functions in Online and Offline
mode while Setup mode is disabled.
In this case, the Setup menu can only be
called up by holding the key Setup while
switching on the printer.
Language English German French Italian
Spanish Turkish The menu can be shown in six
languages.
Paper Single TrFront TrRear PullTr Selects the paper parameters Formlen
(form length), FormAdj (first printing
position/TOF) separately for each paper
source in the current menu.