Dascom 2600 User Guide - Manual (Page 65)

Tally Dascom 2610
52
6.3.3 Access to WebPanel & Control Tool
6.3.3.1 Access to WebPanel
Once an IP address has been set up, you can access WebPanel by typing the printer's IP
address into your browser address box.
The current status of your printer is displayed on the right hand side of the screen. This is
refreshed every 20 seconds, whenever you refresh the page or click Printer Status. The left
side allows you to query the printer, configure it and access network options.
If you try to access the printer after power on the printer it may last up to one
minute until the printer is visible in the network.