Dascom 2600 User Guide - Manual (Page 66)

Tally Dascom 2610
53
6.3.3.2 Access to Config Tool
The software interface for is shown as below. Click “Connect” to select the related interface.
(After the Configuration Tool is connected, the operation interface is similar to the WebPanel,
thus the operation instruction not be started again).
6.3.4 Printer Status
Selecting this option refreshes the status display. Displayed on this page are:
◆ Processing state
◆ Loaded menu
◆ Error state
◆ Firmware level
◆ Serial number
◆ Asset number
◆ Panel lock status
Options to change the Online / Offline state, network configuration and the virtual control
panel for your printer are all accessed from this page.