Bowflex TreadClimber TC5000 - Manual (Page 44)

41 Bowflex ® TreadClimber ® Owner’s Manual
Walking Belt Adjustment
If either of the walking belts seem to be tracking excessively to one side or the other, adjustments can be
made at the front roller of each treadle.
Misalignment Test and Resolution
Visual Test – Standing beside the unit, set the speed at 2 mph. Standing in front of the unit you will see
adjustment bolts on each end of each front roller. If the belt is tracking too far to the right, tighten the right
adjustment bolt on that roller using the provided hex key in full turn increments to realign belt. If the belt
seems to be tracking too far to the left, do the same thing on the left adjustment bolt for that roller.
NOTE: Belts should not be so tight that you cannot get your hand snugly under them when
machine is turned off and unplugged.
Getting Started
Walking Belt Alignment
Exploded View
Adjustment
Bolts
Adjustment
Bolts