5c. the focus mode menu, 5d. factory defaults, Page 13 – Eschenbach Optik Andromeda User Manual

Page 13: Focus mode push focus autofocus manual focus, Press to reset

background image

Page 13

Rev E EN

VGA: Press to display external computer video.

Ext Camera: Press to display an external camera or other video
Freeze: Press to freeze the display.

Disabled: Pressing the function button has no effect.

5C. The Focus Mode menu

You can choose from three different
methods to focus the Andromeda.

Push Focus: In this mode the camera
will re-focus itself only when the Focus

button is pressed. If the height of the material under the camera is
changed, it will be necessary to press the focus button again.

Autofocus: In this mode the camera constantly monitors the
image and re-focuses automatically if necessary. This is the

recommended mode to use for most applications.

Manual Focus: This mode is useful if you require an image that is
slightly out of focus or you are looking at an awkward object that

the camera will not focus on correctly. In this mode you must press


(Hold focus button down and press Zoom Up or Down) to set

your desired focus.

5D. Factory Defaults

Selecting this menu item will restore all video settings, modes,
colors and button functions to their factory settings. This option is

provided in case you set the unit into a mode that you cannot remember
how to undo. You will be prompted to press the middle function button
on the front panel to reset the unit;
pressing any other button will exit
without altering the current settings.