Eschenbach Optik Eclipse Scholar - Manual (Page 11)

Page 11
Rev1.0 EN
MAIN MENU
VIDEO CONTROLS
FOCUS MODE
FACTORY DEFAULTS
VIDEO CONTROLS
BACKLIGHT
BRIGHTNESS
CONTRAST
SATURATION
IRIS
Use the Zoom buttons to move the highlight up and down.
Press the Focus button to proceed when you have highlighted the
desired item.
You can press the Mode button
at any time to exit the menu.
The various menu choices are explained below.
6A. The Video Controls menu
The items in the Video Controls menu
are explained below. Selecting a
control item by pressing will clear the
menu and bring up an indicator at the bottom
of the screen. You can then use either the
Zoom or Brightness buttons to adjust the
setting. Press or when you are
finished adjusting the control to bring you back to the full Video Controls
menu.
Backlight: This controls the intensity of the lamps behind the
display. The lamps can be dimmed if the image is causing glare
or for some eye conditions such as
photophobia.
Brightness: This control affects
the overall level of light coming
from the image. The brightness settings for picture mode and reading
mode are independent and stored separately.
Contrast: The contrast control increases the difference between
bright and dark areas, making bright areas brighter and dark areas
darker. The Eclipse retains independent settings for picture and reading
modes.
Saturation: This controls the intensity of colour displayed in
picture mode. Reducing the saturation to minimum will result in a
monochrome image.
Iris: The iris controls the amount of light entering the camera.