Eschenbach Optik Eclipse Scholar - Manual (Page 17)

Page 17
Rev1.0 EN
Changing the lamps
If either of the lamps begins to dim or fails to
start, they will need to be changed. You
should replace both lamps at the same time
to maintain a good image.
Before starting to replace the lamps you
must unplug the power cord from the back
of the unit.
You will require a small crosshead
screwdriver to unscrew the lamp covers.
Refer to the diagrams across and follow the
sequence of operations. The lamps should
be removed from their sockets by pulling
them in the direction of their length only. The
lamps are made of glass, so be careful not
to break them.
Replace the lamp with the same type and
colour temperature. One suitable lamp is:
• Osram Dulux S/E 7W/21-840
The “840” indicates the colour temperature
which should be cool white to maintain
colour rendition.
To replace the lamps simply reverse the sequence of operations.